SQUIX applicators.
Volume: Up to 7,500/day
Max Print Width: 8.25 in (210mm)
Print Speed: up to 4.5 ips
Ink: 1 multi-use print head with separate CMY dye ink tanks, pigment ink optional
Cutter: Yes, pizza-wheel style
Enquiry about SQUIX applicators.
Description
Applicator S1000
vergrößernLabeling in real time
A S1000 assembled to a SQUIX peel-off printer provides a cost-effective solution if operated semi-automatically or integrated in vertical orientation in production lines. A stroke cylinder applies the labels to products.
| Applicator | S1000-220 | S1000-300 | S1000-400 |
|---|---|---|---|
| To be used with | SQUIX 2, SQUIX 4.3, SQUIX 4, SQUIX 4.3 M, SQUIX 4 M, SQUIX 6.3 | ||
| Cylinder stroke mm | 220 | 300 | 400 |
| Pad stroke below device mm |
64 | 144 | 244 |
| Compressed air bar | 4.5 | ||
| Cycle rate labels/min approx.1) | 25 | ||
Applicator S3200
Labeling in real time
A S3200 assembled to a SQUIX peel-off printer provides a cost-effective solution if operated semi-automatically or integrated in production lines. Printed labels are applied to products automatically. For this purpose, labels are set 45° to 95° to the horizontal by a rotary cylinder and move towards products by means of a a short-stroke cylinder.
vergrößernIn terms of service life, pre-dispense, compressed air regulation, process reliability and supporting air, data correspond to the S1000 applicator.
| Applicator | S3200 |
|---|---|
| To be used with | SQUIX 2, SQUIX 4.3, SQUIX 4, SQUIX 4.3 M, SQUIX 4 M |
| Rotary cylinder | 45°- 90° |
| Stroke cylinder up to mm | 30 |
| Immersion depth pad F up to mm | 5 |
| Compressed air bar | 4.5 |
| Cycle time labels/min approx.1) | 20 |
Tamp pads or blow pads are manufactured according to the size of a label.
| Tamp pad | Blow pad | |||
|---|---|---|---|---|
| A3200-1100 | A3200-2100 | |||
| To be used | SQUIX 2 | SQUIX 4.3, 4 | SQUIX 2 | SQUIX 4.3, 4 |
| Label width mm | 4 – 63 | 10-116 | 10 – 63 | 10-116 |
| Label height mm | 6-80 | 10-80 | ||
| Product surface | flat | |||
| State of a product during labeling | at rest | at rest or in motion | ||
PlayDemand modules S5104, S5106
label products in motion on a conveyor. Positions are detected by a product sensor. As soon as peel-off has been triggered, the next label is printed. The speed of a product on the conveyor must adapt to the print speed. A reflective sensor detects positions.
vergrößern| Demand module | S5104 | S5106 |
|---|---|---|
| To be used with | SQUIX 4.3, SQUIX 4 | SQUIX 6.3 |
| Label width mm | 25-116 | 50-176 |
| Label height mm | 25-210 | |
| Print line distance to the peel-off plate mm | 336-518 | |
| Product surface | flat | |
| Product height | fixed | |
| State of a product during labeling | in motion, speed adapted to the printer | |
| Cycle rate labels/min approx.1) | 60 | |
Details
Applicator S1000
1 Long service life: The ball-bearing guides are low-wearing.
2 Products of different heights: can be labeled by means of a stroke cylinder. Various stroke lengths are provided.
3 Compressed air regulation unit: Micro filters prevent from contamination. Regulating the pressure ensures a permanent good labeling quality.
4 Highly-reliable processes: The supporting air, intake air and stroke speed may be adapted. If sensitive products and packagings are in use, the pressing force can be reduced to less than 10N (1 kg). To prevent intake ducts from contamination, they get purged after any labeling.
5 Label sizes: Labels 25 to 176 mm wide and 25 to 200 mm high can be applied.
6 Supporting air: to blow labels onto a pad
7 Pad: Labels are transferred to a pad and held there by vacuum. They move towards a product uby means of a stroke cylinder.
Pre-dispensing button
to verify a labeling process. By pushing the button once, a label is printed and transferred to the applicator. By pushing the button once more, labeling is triggered.
Accessories
-
Universal pads
Drilled intake holes are arranged in a grid and covered by foil, to be pierced according to the size of a label.
Universal pad A1021 A1021 To be used with SQUIX 2 SQUIX 4.3
SQUIX 4SQUIX 4.3
SQUIX 4Label width mm 25 – 63 25 – 70 25 – 90 Label height mm 25 – 60 25 – 90 Product surface flat Product height various State of a product during labeling at rest -
Tamp pads
are manufactured according to the size of a label.
Tamp pad A1021 To be used with SQUIX 2 SQUIX 4.3
SQUIX 4SQUIX 6.3 Label width mm 25-63 25-116 50-176 Label height mm 25-200 Product surface flat Product height various State of a product during labeling at rest -
Universal pads spring-mounted, tamp pads spring-mounted
Universal pads, spring-mounted
Pitch of spring enables labels to apply even on inclined surfaces. Drilled intake holes are arranged in a grid and covered by foil, to be pierced according to the size of a label.Tamp pads, spring-mounted
Pitch of spring enables labels to apply even on inclined surfaces. Manufacture according to the size of a labelUniversal pad Tamp pad A1321 A1321 A1321 To be used with SQUIX 4.3, SQUIX 4 SQUIX 4.3, SQUIX 4 SQUIX 4.3, SQUIX 4 SQUIX 6.3 Label width mm 25 – 116 25 – 116 25 -1 16 50 – 176 Label height mm 25 – 102 25 – 152 25 – 200 Product surface flat Product height various State of a product during labeling at rest -
Blow pads
to apply labels on products sensitive to pressure. A pad moves to a height fixed approx. 10 mm above a product to trigger labeling.
Blow pad A2021 To be used with SQUIX 2 SQUIX 4.3, SQUIX 4 SQUIX 6.3 Label width mm 25 – 63 25 – 116 provided on request Label height mm 25-100 Product surface flat Product height fixed State of a product during labeling at rest or in motion -
Roll-on pads
Labels are fed to the roller of a pad during printing. The pad then moves to the product. Labels are picked up by the product in motion and rolled on.
Roll-on pad A1411 To be used with SQUIX 4.3, SQUIX 4 SQUIX 6.3 Label width mm 25 – 116 50 – 176 Label height mm 80 – 200 Product surface flat Product height various State of a product during labeling in motion -
All-around labeler
to label cylindric items on a 360° circumference. Products are laid onto the rollers and labeling is triggered via a hand switch or a foot switch. Delivery includes a mount, a cable to connect to a SQUIX printer, and a foot switch
Tamp pad A1021 M1021 To be used with SQUIX 2 SQUIX 4.3, SQUIX 4 Label width mm 25 – 63 25 – 116 Label height mm 25 – 140 Product diameter mm 12 – 40 Product surface cylindric State of a product during labeling in rotary motion
Videos
Reviews
There are no reviews yet.