Label printers SQUIX 4 M

Description

They find use in various areas of use.They have been developed with consistent focus on intuitive usability and highly reliable processing.

Print mechanics and chassis are made of high-quality materials and match perfectly in design and function. A wide range of peripherals and software enable user-specific solutions.

The rugged printers stand up to any demand, whether operated stand-alone, with a PC or in a network. Print jobs are performed quickly and labels are provided straight away thanks to a high-speed processor.

Label printers guiding materials in centered position

Basic unit

Peel-off unit

The precise and flexible ones

All materials that are wound on rolls or reels can be printed, so can fanfold ones. Very small labels or slim continuous materials such as pressed tubes are typical applications.

A specified sensor allows round or oval hoses as high as 5 mm be labeled.

Label printer	SQUIX 4.3 M, SQUIX 4.3 MP		SQUIX 4 M, SQUIX 4 MP
Printable resolutiondpi	203	300	300	600
Print speedmm/s max.	300	300	300	150
Print widthmm max.	104	108.4	105.7	105.7

Video

Details

Label printers with centered material guidance

Differences to label printers guiding materials aligned to the left

1 Ribbon retainer
A ruler helps ribbons be set.

2 Plungers
Both have been assembled firmly for all widths of material. There is no need of aligning the print head.

3 Roll retainer
By applying the margin stop, rolls are automatically centered.

4 Material guide
Its position next to the print roller supports print images be accurate. Widths are set with the help of a spindle.

DR4-M25 DR4-M30

DR4-M50 DR4-M60

DR4-M80 DR4-M80

5 Slim print rollers
If small materials and ribbons are in use, adapted print rollers are required to achieve accurate print results. They prevent rollers from wear, print heads from contamination and avoid errors while materials are fed.

Synthetic rubber coating

Control panel

Self-explanatory symbols simplify settings and enable printers be operated intuitive and easily.

1 LED: Power ON

2 Status bar: receive data, record data stream, prior warning to a ribbon ending, SD memory card / USB stick plugged, WLAN, Ethernet, USB slave, time

3 Printer status: ready, pause, number of labels printed in a print job, label peeled off, awaiting external start signal

4USB port for plugging a service key or a memory stick, to transfer data to the IFFS memory

5 Operation

Cutter / perforation cutter: cutting a material
External rewinder: label rolls wound outside or inside
Applicator: print and apply labels in individual steps
Tear-off mode / peel-off mode: print a label

Tear-off mode: label backfeed

Jump to menu

Stop Stop and delete all print jobs

Reprint Reprint

Label feed

Suspend Suspend and continue a print job

vergrößern
Setup

vergrößern
Printing parameters

vergrößern
Print position Y

vergrößern
Print speed

vergrößern
Video tutorials

External control panel

If the control panel of a printer cannot be accessed, an additional external one can be plugged.

Same functionality as on the printer

Landscape or portrait mode

Operability as targeted, either on an external panel or on a printer

USB 2.0 Hi-Speed device for plugging a printer

1 LED: Power ON

2 USB port for plugging a service key or a memory stick, to transfer data to the IFFS memory

3 cab provides specified USB cables for power supply. Lengths are 1.8 m to 16 m

Print heads

A print head can be replaced by any other one, provided they are of equal width. They are detected by the CPU and calibrated.
Major data such as operational performances, maximum operational temperatures and heating are kept in memory by the print head. The data can be read at the premise.

Print heads provided for SQUIX 2, SQUIX 4 – 300, 600 dpi
sharp-edged print images
small fonts, graphics on typeplates
printing on materials that imply high energy needs

Print heads provided for SQUIX 4.3, SQUIX 6.3 – 203, 300 dpi
Print heads provided for SQUIX 8.3 – 300 dpi
durable, printing in harsh environments, direct thermal printing

Maintenance

Label sensors
They can be unlocked by touch and pulled out for cleaning.

Print heads
They are easy to replace in few steps. In general, no adjustments are required.

Print rollers
They are quick and easy to loosen for cleaning or removal using a screw.

All-purpose tool
It is provided close at hand on a unit for replacing components and assembling periphery.

Brochure

Reviews

There are no reviews yet.

Be the first to review “Label printers SQUIX 4 M”

+91 7982819990

info@printprocess.co.in

B-6 Ranjit Nagar Commercial Complex